- Jemm Lighting W35M250QT 250 Watt Pulse Start MH cutoff Wall Pack. Suitable for entry ways, parking areas, walkways, perimeter security and area lighting.
- Suitable for wall mounting to a height of 15'-25' and typical spacing of 2-3 mounting heights.
- Perfect for areas where a glare free application is required.
- Use the Pulse Start Metal Halide version when a whiter light is preferred.
- Die cast aluminum housing and door frame, with chip and fade resistant long lasting polyester powder coat.
- Knockout pattern on the back of housing for easy junction box mounting.
- Housing is also tapped in the back, on the two sides, top and bottom with 1/2"" NPS holes for conduit entry.
- The anodized aluminum semi-specular reflector is designed for maximum efficiency to direct light down, out and to the sides .
- The lens is impact and thermal-shock resistant tempered soda lime glass.
- Silicone housing gasket seals out moisture and provides years of moisture protection .
- Porcelain 4KV pulse rated mogul base, E39 socket.
- Lamp is included.
- Quad Tap Pulse Start High Power Factor (HPF) ballast with capacitor.
- Corrosion resistant stainless steel external hardware.
- CSA Listed - for Wet Locations
- Optional field installed photocell available for dusk to dawn operation. Choose voltage above.
